Innovus Decorative Panels DP

Instructions for use

Cleaning recommendations:

-With their resistant, hygienic, and non-porous surface, Innovus Decorative Panels require no special care when it comes to maintenance and cleaning;
-It is recommend cleaning the surfaces with a soft, non-abrasive cloths or sponges (dry or damp). After cleaning the surface must be dried, is not recommended to leave the surface wet;
-Suitable products to be used are commercially available surfactant detergents that do not contain abrasive components, such as liquid cleaners and soaps;
-Can also be used organic solvents such as alcohol or acetone (varnish remover) to remove specific stains. In the case of using volatile substances, a good ventilation of the room afterwards must be ensured;
The use of furniture cleaners and waxes is not recommended, as these products tend to get into the surfaces and create a “dirt” layer. The use of degreasing agents, strong acids or bleaches is also not recommended;

Precautions for Safe Handling:

-Accumulation and dispersion of dust with an ignition source can cause a combustible dust explosion. Keep dust levels to a minimum and follow applicable regulations;
-Avoid creating or spreading dust. Keep away from heat, sparks, open flames, and hot surfaces. No smoking;
-Avoid contact with skin, eyes, and clothing. Do not breathe dust. Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and when leaving work;
-Prioritize safety during panel processing by adhering to these key measures:
Wear appropriate personal protective equipment (PPE),
Ensure all machinery is in proper working condition and follow safety protocols.
Provide adequate ventilation when working with adhesives and finishes.
-Fire Hazard: Not considered flammable but will burn at high temperatures;
-Explosion Hazard: Product itself is not explosive but if dust is generated, dust clouds suspended in air can be explosive;
-Since the panels are mostly made of wood, the formation of wood dust is to be expected during production process. Regarding the dust extraction and fire protection, local safety regulations must be controlled during Innovus panels processing (cutting, drilling, edging, etc.). Protective equipment as safety glasses, dust mask, gloves are recommended when using hand tools without a dust extraction system;
-The ignition temperature of wood-based panels is approx. 400°C. Suitable extinguishing media is water and foam;
-In case of fires, the same firefighting techniques can be used as for other wood-like building materials. Due to the high proportion of wood, the composition of the flue gases is comparable to that of wood. Incomplete combustion, as with any other organic material, may contain toxic substances in the smoke;

End of Life:

-The principle of cascade use of the wood must be applied to the elements made with Innovus Decorative Panels. Sonae Arauco coated particleboard leftovers and residual materials should be primarily directed towards material recycling. If this is not possible, they must be directed for energy recovery instead of landfilling;
-Waste code according to the European List of Waste: 17 02 01;
-Reuse: In the case of a building refurbishing, Innovus decorative panels can be separated, if the panel was not bonded over its full surface and used again for the same or similar application;
-Recycle: Waste from deconstruction, decoration and furniture elements can be separated and routed to a material stream (post-consumer recycled material). The waste wood resulted can be recycled in the production of new particle boards;
-Energetic use: If recycling is not an option, the product can be separated to be used to energetic recovery. Due to the high heating value of approx.16.6 MJ/kg at 20 % moisture content, Innovus decorative panels can be used for energy recovery and the generation of heat and electricity (e.g., in CHP plants), following the cascading principle for wood. Please observe all legal requirements that can be applied locally;